Water Modified DGB20
Water is blended consistently with our DGB20 road base to create a premium road base product at optimum moisture content (OMC). The use of Water Modified DGB20 can reduce the cost of water carts, machine hire and labour – therefore lowering the overall cost of your project. DGB20WM still remains compliant with RMS QA Specification 3051.
Cement Stabilised DGB
A 60/40 Slag-Cement binder is water blended with our DGB20 road base to create a premium road base product which is cement stabilised. This creates further strength in the base course material, creating a much stronger finished surface. Cement ratios can be blended from 2% (50:1) to 12% (8:1). Refer to your engineering specifications to find out which ratio is suitable for use on your project.
R73 Heavily Bound Base
Densley Graded Heavily Bound pavement material with a nominal size of 20mm. A well graded product from 26.5mm to fine dust, blended via our pugmill at our Camellia facility with R73 HBB binder material & using RMS 3051 MB20 material to be bound. Blended product is compliant with RMS QA Specification R73.
10mm Recycled Aggregate
Crushed concrete and brick, with minimal fines, with a nominal particle size of 10mm. For use as a free draining material, retaining wall backfill, under pipes, slabs etc.
20mm Recycled Aggregate
Crushed concrete and brick, with minimal fines, with a nominal particle size of 20mm. For use as a free draining material, retaining wall backfill, under pipes, slabs etc.
40/20 Recycled Aggregate
Crushed concrete and brick, particle sizes nominally between 20mm and 40mm with an average of approximately 30mm. Minimal fines, perfect for back-fill behind retaining wall and site access roads, reducing contamination carried onto streets from construction / demolition sites.
A crushed recycled Bedding / Fill sand, with better compaction than dune or river sands, ie, crushed particles giving better mechanical interlock than round grained sands. Suitable for use under slabs, pavers, and as pipe bedding, fill etc. Compliant with RMS QA Specification R11 Bedding & Haunch.